Ingersoll Rand 54672530 Air Filter Element — Product Details

1. Product Overview

54672530 air filter element is a genuine Ingersoll Rand intake filter element engineered for N55 and N75 series screw air compressors. The element uses high-efficiency synthetic fiber/glass fiber media to block dust, dirt, and particulate matter from entering the screw airend, protecting rotors, bearings, and shaft seals from wear and extending compressor service life.

The 54672530 is a large cylindrical pleated element with an outside diameter of approximately 247 mm and a height of approximately 365 mm, featuring a red polyurethane (PU) sealing cap. It also cross-references several Atlas Copco part numbers, with HiFi Filter SA17281 as an equivalent.

2. Basic Specifications

3. Technical Specifications

3.1 Filtration Performance

3.2 Flow and Pressure Drop

3.3 Dimensions and Installation

3.4 Construction Materials

3.5 Operating Tolerance

3.6 Service Life and Maintenance

3.7 Standards

• ISO 5011: Inlet air cleaning equipment for internal combustion engines and compressors — performance testing
• ISO 16890 / EN 779: General ventilation air filter classification
• GB/T 14295: Air filters
• GB/T 6165: Test methods for air filter performance

4. Standard Maintenance and Installation

Replacement Interval

• Standard conditions: every 4,000 hours or 8–12 months, whichever comes first
• High-dust conditions: every 2,000–3,000 hours
• Replace immediately if the media appears blackened, heavily loaded, or the pressure differential reaches 900 Pa

Installation Steps

1. Shut down and lock out: Turn off the main power to the compressor, apply lockout/tagout (LOTO), and confirm the unit has fully stopped.
2. Open the filter housing cover: Loosen the retaining bolts or clips and remove the cover.
3. Remove the old element: Pull out the old 54672530 element and check whether the gasket remains in the housing groove.
4. Clean the housing: Wipe the inner walls and sealing surface with a clean cloth to remove dust and debris.
5. Inspect the new element: Verify part number 54672530, check for media damage, cracked end caps, or aged red gaskets.
6. Install the new element: Place the new element vertically into the center of the housing, ensuring the upper and lower gaskets seat correctly without misalignment.
7. Refit the cover: Reinstall the cover and tighten bolts or clips evenly.
8. Start-up check: Start the compressor and listen for air leaks at the filter housing.

5. Frequently Asked Questions

Q1: Is the 54672530 a genuine OEM part?

A: The 54672530 is a genuine Ingersoll Rand part, featuring yellow high-efficiency media and a red polyurethane end-cap seal, designed for Ingersoll Rand N55/N75 series screw compressors.

Q2: Which machines does the 54672530 fit?

A: It fits Ingersoll Rand N55 and N75 series screw compressors. If you are unsure about your model, please provide the serial number for verification.

Q3: What is the equivalent part number for the 54672530?

A: The equivalent is HiFi Filter SA 17281. It also cross-references the following Atlas Copco part numbers: 1613950100, 1613951000, 1631043700, 2255300129.

Q4: What are the dimensions of the 54672530?

A: Outside diameter approx. 247 mm, inside diameter approx. 150 mm, overall height approx. 365 mm, weight approx. 5 kg.

Q5: How do I know when to replace the air filter element?

A: Replace when: (1) visual inspection shows blackened or heavily loaded media; (2) operating differential pressure reaches the alarm value of 700 Pa; or (3) the 4,000-hour or 8–12 month interval is reached.

6. Compatible Machine Models

To confirm compatibility, please provide the compressor serial number for precise verification.

7. Related Parts

Note: For 100% accurate matching, please provide the complete compressor serial number. We will check the original parts diagram and confirm current supply information.